18. MEMORY OF CARRIED OUT MEASUREMENTS
A moisture analyzer MAX series enables storing Maximum 100 last carried out
measurements that comprise the following set of data: date, time,
measurement time, name, drying mode, drying temperature, drying time, start
mass, end mass, final result. The measurements are saved in a pile. After
saving over a 100 a measurement in a pile, the record with no. 101 is
overwritten on the record no. 99, and the whole list is moved upwards by one.
It causes deleting the measurement record in position 00. Means of entering
the memory of measurements:
When in main window press Display button on the moisture analyzer’s
overlay.
A window is opened containing list of stored measurement records.
The data is ordered according to its performance schedule. If a
measurement was carried out using the Mode from Database, then next to
the measurement date and time the record displays mode name. in order
to print data place the cursor (black triangle) next to a needed record and
press Setup key.
The detailed data on a measurement is displayed (data order as on a
printout).
In order to print data press PRINT key. The set of data is sent via RS 232
interface to a connected printer / computer.
To Next Page
Loading...
