RADWAG MAX 60

- 61 -
Procedure:
Go to software menu. Use DOWN
navigating arrow key to place the cursor
(black triangle) next to a parameter
Corrective Coefficient.
Use function keys on moisture analyzer keyboard, or an external computer
keyboard, to set needed coefficient value. Set the coefficient value in accordance
with above specified means of moving in the user menu.
10.10. Restore default setting
The parameter enables restoring the default software settings, as determined
by the software designer.
Procedure:
Go to software menu. Use DOWN
navigating arrow key to place the cursor
(black triangle) next to a parameter
Default.
Press RIGHT arrow navigating key to
display a message for accepting the
restoration of default settings.
Press ENTER key to restore default value
of all parameters in a moisture analyzer,
as programmed by the software designer.