On returning to the main window (with procedure of saving changes) the use
can carry out a drying process after setting the basic parameters for drying a
sample to be tested. There is no need to select a specific drying program from the
database. When setting the parameter Database of drying programs to value 0 –
disabled. The user does not have access to the database records saved in the
moisture analyzer memory.
Press key. The software automatically goes to setting the basic drying
parameters.
9.2. Means of setting drying parameters:
Press Test Menu key which opens a
window with the first step of the drying
parameters of the shortened menu.
Press right arrow navigating key to
enable selection of a drying profile (name
of a drying mode is previewed above the
mode’s graphic presentation. The
pictogram denoting drying mode
selection menu is flashing in the upper
left corner of the display)
To Next Page
Loading...
