RADWAG MAX 60

- 30 -
8.3.2. Setting time format
Press navigating arrow key to enter submenu 02 Time format.
Select one of available values:
1 Time format – 12 hours
2 Time format – 24 hours
On selecting the appropriate value accept it by pressing ENTER key. 12 hour time
format is differentiated by letters PM or AM visible on a printout.
8.3.3. Setting time
Press navigating arrow key to enter
settings of parameter 03 Time
Set current time:
or
Place the cursor next to a value
to be changed (i.e. Hour, Minute,
Second) .
Enter the value settings mode
(the first digit starts flashing)
or
Use navigating arrow keys to set
time
Select a digit to
be changed
or
Select digit value
Accept set value of time (the last
changed digit stops flashing)
Repeat the process for the following values (minute, second). On setting the
new values press ENTER key. The moisture analyzer returns to submenu P3
Date/Time. The time value visible in the upper bar of the display is changed. After
setting the time to a needed value return to the weighing mode following procedure
described in point 7.1 of this user manual.