o Select name of a desired working mode, and press it
16.2. Parameters related to a working mode
Each working mode has programmable parameters determining its
functioning. Procedure of determining these parameters:
1. Press grey coloured workspace area
2. Below menu is displayed:
o <Settings> - additional options related to a mode
o <Keys> - defining quick access keys
o <Information> - selecting information displayed in the workspace
o <Printouts> - selecting type and content of a printout
o <Profile> - selecting a profile, which is active during moisture
analyzer’s operation
3. Press corresponding menu item and select area for modification,
Description of basic parameters accessible in <Settings> tab is provided in
point 11.6 of this user manual “Additional parameters on weighing process”.
Other parameters specific to each of working modes are presented in working
modes description.
16.3. Quick access keys
A user can define up to 7 quick access
keys, which are displayed in the bottom
bar.
On assigning a function to a specific
key, a corresponding soft key appears,
and it is located in the bottom
navigation bar of the main window.
To Next Page
Loading...
Need help?
General
