15. PROFILES
A Profile is a data pack determining:
o functioning of working modes, e.g. weighing and drying,
o type of data displayed during working mode operation,
o active function keys,
o accessible set of measuring units
o mandatory criteria for moisture analyzer’s speed of operation and
measurement stability,
The software enables creating numerous profiles, which in practice provides:
o each user to create their own and individual operating environment
o moisture analyzer operation can be easily programmed by activating used
defined function keys and information on process (improving ergonomics
of operation)
15.1. Creating a profile
A default profile is named <Home>. The Administrator can create new profiles
by:
− Copying an already existing profile and its modification
− Creating a new profile
Copying an existing profile
Procedure:
• Enter moisture analyzer’s main menu by pressing Setup key,
• Enter submenu < Profiles>,
• Press and hold an entry with profile name that should be copied,
• A menu is opened referring to available options:
o Edit
o Delete
o Copy
o Cancel
• Select option <Copy>
• A new profile named <Copy name> is created, and all setting are the
same as in the base profile,
• After copying change necessary data in a profile: (name, etc.)
Creating a new profile
Procedure:
• Enter moisture analyzer’s main menu by pressing Setup key,
• Enter submenu < Profiles>,
• Press key, which opens a message box: <Create new record?>,
• Accept the message box by pressing key. The software automatically
adds a new record and enters its editing mode.