MiniRAE Lite User’s Guide
Measurement range & resolution
Lamp Range Resolution
10.6 eV
0.1 ppm to 5,000 ppm 0.1 ppm
Response time (T
90
): 2 seconds
Accuracy 10 to 2000 ppm: ±5% at calibration point.
(Isobutylene):
PID Detector: Easy access to lamp and sensor for cleaning
and replacement
Calibration: Two-point field calibration of zero and
standard reference gases
Inlet Probe: Flexible 5" tubing
Keypad: 1 operation key and 2 programming keys; 1
flashlight switch
Direct Readout: Instantaneous, peak value, and battery
voltage
Intrinsic Safety: Europe: ATEX (II 1G EEx ia IIC T4)
IECEx (Ex ia IIC T4)
EM Interference: Highly resistant to EMI/RFI.
Alarm Setting: Separate alarm limit settings for Low Alarm
and High Alarm
Alarm: Buzzer 95dB at 30cm and flashing red LEDs
to indicate exceeded preset limits, low
battery voltage, or sensor failure
Alarm Type: Latching or automatic reset
Real-time Clock: Automatic date and time
Communication: Download instrument setup from PC via RS-
232 with Travel Charger, or via USB with
optional Charger Stand
Sampling Pump: Internally integrated. Flow rate: 450 to 550
cc/min.
10
To Next Page
Loading...
