MiniRAE Lite User’s Guide
Repeat this process until all numbers are entered.
When you have completed your selections, press [MODE]. You will
see two choices: Save and Undo. You have the opportunity to register
the new settings or to change your mind and revert to your previous
settings.
• Press [Y/+] to save the changes.
• Press [N/-] to undo the changes and revert to the previous
settings.
Alarm Type
There are two selectable alarm types:
Latched When the alarm is triggered, you can
manually stop the alarm.
The latched setting only controls alarms
for High Alarm and Low Alarm.
Note: To clear an alarm when the
instrument is set to “Latched,” press
[Y/+] when the main (Reading) display is
shown.
Automatic Reset When the alarm condition is no longer
present, the alarm stops and resets itself.
1. Press [N/-] to step from one alarm type to the other.
2. Press [Y/+] to select an alarm type.
When you have completed your selections, press [MODE].
You will see two choices: Save and Undo. You have the
opportunity to register the new settings or to change your mind
and revert to your previous settings.
• Press [Y/+] to save the changes.
43
To Next Page
Loading...
