MiniRAE Lite User’s Guide
Buzzer & Light
The buzzer and light alarms can be programmed to be on or off
individually or in combination. Your choices are:
• Both on
• Light only
• Buzzer only
• Both off
4. Press [N/-] to step from one option to the next.
5. Press [Y/+] to make your selection (the dark circle in the “radio
button” indicates your selection).
6. When you have completed your selections, press [MODE].
You will see two choices: Save and Undo. You have the
opportunity to register the new settings or to change your mind
and revert to your previous settings.
• Press [Y/+] to save the changes.
• Press [N/-] to undo the changes and revert to the previous
settings.
Date
The Date is expressed as Month/Day/Year, with two digits for each.
Press [Y/+] and the display shows the current date. Note that the left-
most digit flashes to indicate it is selected.
Press [Y/+] to step through all 10 numerals (0 to 9).
Press [N/-] to advance to the next digit. The next digit to the right
flashes.
Repeat this process until all six digits of the new date are entered.
Press [MODE] to exit.
Press [Y/+] to save the new date.
45
To Next Page
Loading...
