Operating the MultiRAE Plus
battery voltage, measured in volts.
will be 4.8 V or greater. When
the battery voltage falls below
4.4 V, the “Bat” warning message
appears and only 20-30 minutes
of run time remain before the
instrument will automatically shut
Date & Time, Run-Time and
- the runtime is how long the
instrument has been on in hours
in units of specified target gas.
Correction factor may only
be changed in Program Mode.
in units of specified target gas.
Correction factor may only
be changed in Program Mode.
out the gas concentration readings
if a serial printer is connected to
can be turn on using ProRAE
uploading data from the monitor
to a computer or downloading
configuration information from
a computer to the monitor via a