EasyManua.ls Logo

Rae MultiRAE Plus PGM-50/4 - Specifications; Key Product Specifications

Rae MultiRAE Plus PGM-50/4
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40
Specifications
Speci cations
Size
4.65”L x 3.0W x 1.9”H (11.8 x 7.6 x 4.8 cm)
Weight
16 oz with battery (454g)
Sensors
Up to 5 sensors including:
Photo-Ionization detector for VOCs, 10.6 eV
lamp standard
Protected catalytic bead for combustible gases
Interchangeable electrochemical sensors for
oxygen and toxic gases (2)
Battery
Interchangeable Li-Ion and alkaline battery packs
Rechargeable units include lithium-ion battery pack
with internal smart charging, 120V AC/DC wall adapter,
and spare alkaline battery pack
Operating Hours
14 hours continuous with Li-Ion (typical)
Unit will run and charge simultaneously
Display
2 line, 16 digit LCD with LED backlighting automatically
in dim light or alarm condition
Keypads
1 operation and 2 programming keys
Direct Readout
Instantaneous (up to 5) values:
• Oxygen as percentage by volume
• Combustible gas as percentage of lower
explosive level (LEL)
• Toxic gases and VOCs as parts per million by volume
(VOC scaleable using correction factors)
• High and low values for all gases
• STEL and TWA values of toxic gases and VOCs
• Battery and shut down voltage
• Date, time, elapsed time, temperature
Alarms
90 dB buzzer and  ashing red LED to indicate exceed-
ed preset limits:
• High: 3 beeps and  ashes per second
• Low: 2 beeps and  ashes per second
• STEL and TWA: 1 beep and  ash per second
• Automatic reset or latching with manual override
• Additional diagnostic alarms and display messages for
low battery and pump stall
Datalogging
20,000 points (80 hours, 5 channels at one minute inter-
vals) download to PC with serial number of unit, user ID,
site number, and calibration date

Table of Contents

Related product manuals