Rae QRAE II User Manual

QRAE II User Guide
Page 41
Pump Mode. Options are Pump Mode and Diffusion Mode.
Caution: Only use Pump Mode with a QRAE II outfitted with a pump, and only use
Diffusion Mode with a QRAE II without a pump.
1. Press [MODE] to step from Save to Quit to the up or down arrow.
2. Choose Pump Mode or Diffusion Mode by pressing [Y/+].
3. Press [MODE] to step to Save or Quit.
4. Press [Y/+] to commit your change or to exit to the next menu item.
Change Pump Speed. Options are Fast and Slow.
Note: The “Change Pump Speed” menu option only applies when Pump Mode is
selected. Therefore, it does not apply to the QRAE II Diffusion model.
1. Press [MODE] to step from Save to Quit to the up or down arrow.
2. Choose Fast or Slow by pressing [Y/+].
3. Press [MODE] to step to Save or Quit.
4. Press [Y/+] to commit your change or to exit to the next menu item.
Back. Press [MODE] to return to the top of the Change Monitor Setup menu, or press
[Y/+] to return to the top of the Normal Mode menu.

Rae QRAE II Specifications

General

Brand	Rae
Model	QRAE II
Category	Measuring Instruments
Language	English