Rae QRAE II User Manual

QRAE II User Guide
Page 54
When the transfer is done, you will see a screen with the datalog information. You can
now export this datalog for other use or printing.
8.2 Uploading Firmware To The QRAE II From A PC
Uploading new firmware to your QRAE II requires connecting the QRAE II and PC.
Follow these steps to make the connection:
1. Connect the data cable to the PC and the cradle.
2. Place the QRAE II into its cradle. The charging LED should be illuminated.
3. Start ProRAE Studio on your PC.
4. From ProRAE Studio, select “Operation” and select Setup Connection.
5. Select the COM port to establish a communication link between the PC and the
QRAE II.
Once communication is established, follow the instructions that accompany ProRAE
Studio and the firmware to upload the new firmware to your QRAE II.

Rae QRAE II Specifications

General

Brand	Rae
Model	QRAE II
Category	Measuring Instruments
Language	English