EasyManua.ls Logo

Rae ToxiRAE Pro - ToxiRAE Pro Specifications

Rae ToxiRAE Pro
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ToxiRAE Pro User’s Guide
7
2. Specifications
ToxiRAE Pro Specifications
Dimensions
118 mm x 60 mm x 30 mm (4.6" x 2.4" x 1.2")
Weight
220g (7.76 oz)
Sensor
Over 20 intelligent interchangeable field-replaceable electrochemical sensors
Battery
Rechargeable Li-ion battery
• Operating time > 30 hours (normal operation)
• Recharge time < 4 hours through charging cradle
Display
Graphical LCD display with white LED backlighting (activated when monitor
is in alarm or with a button press)
Display Readout
Real-time reading of concentrations in parts per million; battery status;
datalogging on/off status; wireless on/off and reception quality; STEL, TWA,
and peak values (as applicable)
Keypad
2 buttons for operation and programming
Sampling
Diffusion
Calibration
Automatic with AutoRAE 2 Test and Calibration Station or manual
Alarm Modes
Wireless remote alarm notification, audible (95dB @ 30cm), vibration, visible
alarm (flashing bright red LEDs), and on-screen indication of alarm conditions
• Additional diagnostic alarm and display message for low battery
Datalogging
• Continuous Datalogging with a three-month capacity (at one-minute
intervals)
• User-configurable datalogging interval (from 1 to 3,600 seconds)
Communication
and Data
Download
• Data download and instrument set-up on PC via charging and PC
communication cradle
• Data download via AutoRAE 2 Automated Test and Calibration Station
• Wireless data and status transmission via built-in RF modem (optional)
Wireless Network
RAE Systems Dedicated Wireless Network
Wireless
Frequency
ISM license-free bands
Wireless Range
(Typical)
300 feet (100 meters)
Operating
Temperature
-4° to 131° F (-20° to 55° C)
Humidity
0 to 95% relative humidity (non-condensing)
Dust and Water
Resistance
IP-65 rating for dust and water ingress protection (validated by an independent
test laboratory)
Hazardous
Location
Approvals
US and Canada
Class I, Div. 1; Groups A,B,C,D T4
Class I, Zone 0 A/Exia IIC T4
Europe
ATEX: II 1G, Ex ia IIC Ga T4
IECEx: Ex ia IIC Ga T4
China
Ex ia IIC T4
CE Compliance
(European
Conformity)
EMC directive: 2004/108/EC
R&TTE directive: 1999/5/EC
ATEX directive: 94/9/EC
Warranty
Two years on non-consumable components and CO, H
2
S, and O
2
sensors
One year on all other sensors, battery, and consumable parts
Specifications are subject to change.

Table of Contents

Related product manuals