Raisecom Gazelle S1020i-GL Series - Table 2-24 Technical Specifications of the Ground Cable; Table 2-25 Technical Specifications of the OT Terminal

Raisecom
Gazelle S1020i-GL (A) User Manual
2 Hardware structure
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
32
Table 2-24 Technical specifications of the ground cable
Parameter
Description
Model (recommended)
POL-ground cable-OT-1.5-4/stripped-16AWG-D. The letter
D indicates the length, which can be customized. For
example, the customer requires a 2-m cable, and you can
name it POL-ground cable-OT-1.5-4/stripped-16AWG-2m.
Standard
Comply with the UL standard and meet RoHS requirements.
Conducting wire
Yellow/Green multi-strand copper-core conducting wire
16AWG (1.25 mm
2
)
Electronic wire UL1007 or UL1005 is used.
Stripped end
10 mm long, tinned
Insulating sheath
Halogen-free flame-retardant heat-shrink tubing. It is a 20
mm plastic tube which shrinks when being heated.
Welding technology
The conducting wire and OT terminals adopt solderless
pressed connection.
Error in length of
conducting wire
±5 mm
Table 2-25 lists technical specifications of the OT terminal.
Table 2-25 Technical specifications of the OT terminal
Parameter
Description
Model
Grounding round-pressed terminal (M6)/RoHS
Technical specifications

4.3 soldering lug

Inner diameter of soldering lug: 6.4 mm

Outer diameter of soldering lug: ≤ 12 mm

Inner diameter of sheath: 3.4 mm

Thickness of soldering lug: ≥ 1 mm
Cross-sectional area of
the conducting wire
12–10 AWG (4–6 mm
2
)

The Gazelle S1020i-GL is delivered without the ground cable. If required, make
the ground cable on site according to technical specifications.

The ground cable cannot be longer than 30 m and should be as short as possible;
otherwise, a ground bar should be used instead.