Raisecom Gazelle S1020i-GL Series - 4.4 Connecting Cables

Raisecom
Gazelle S1020i-GL (A) User Manual
4 Hardware installation
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
49
Figure 4-2 Installing the device on the guide rail
Step 3 Check whether the rail clip is clamped to the guide rail tightly.
4.3 Grounding device
Connecting the ground cable properly is an important guarantee for lightning
protection, anti-electric shock, and anti-interference. The Gazelle S1020i-GL must be
connected to the ground cable correctly during installation, which helps avoid
personal injury and equipment damage.
Connect the ground cable as below:
Step 1 Loosen the screw of the ground terminal counterclockwise and keep the screw and washer
properly, as shown in Figure 4-3.