Raisecom Gazelle S1020i-GL Series - 5 Management and Maintenance; 5.1 Management Modes

Raisecom
Gazelle S1020i-GL (A) User Manual
5 Management and maintenance
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
55
5 Management and maintenance
This chapter describes how to manage and maintain the Gazelle S1020i-GL, including the
following sections:

Management modes

Maintenance modes

NView NNM System
5.1 Management modes
You can access the Gazelle S1020i-GL to manage and maintain the Gazelle S1020i-GL
through the following modes:

Command Line Interface (CLI)

SNMP
5.1.1 CLI
Console interface management
Console interface management refers to configuring and managing the Gazelle S1020i-GL
through the Console interface connecting a terminal or a PC that runs the terminal emulation
program. This management mode is based on the local Console interface without relying on
the service network. Therefore, even though the service network fails, you can configure and
manage the Gazelle S1020i-GL through the Console interface.
Telnet management
The Telnet protocol, one of the TCP/IP protocol stack, is a standard protocol for remote login
through the Internet. By adopting the Telnet protocol, a local PC can be a terminal for the
remote host system. You can remotely log in to and manage the Gazelle S1020i-GL through
the PC which runs the Telnet program.
SSH management
SSH is a protocol that provides secure remote login and other secure network services in
unsecure networks. When you remotely log in to the Gazelle S1020i-GL in an unsecure