Raisecom Gazelle S1020i-GL Series - Figure 2-28 DC Power Connector; Figure 2-29 DC Power Connector; Table 2-29 Technical Specifications of DC Power Cable 1

Raisecom
Gazelle S1020i-GL (A) User Manual
2 Hardware structure
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
37
Figure 2-28 DC power connector
Technical specifications of DC power cable 1
Table 2-29 lists technical specifications of DC power cable 1.
Table 2-29 Technical specifications of DC power cable 1
Parameter
Description
Connector
5.08-8-pin-header/RoHS
Cable gauge
Copper core multi-strand power cable 18 AWG (0.75 mm
2
)
Introduction to DC power cable 2
The DC power cable used by the non-PoE model supplies 12/24 VDC power from the power
souring equipment to the power interface on the Gazelle S1020i-GL, and then transmits
power to the entire device.
Appearance of DC power cable 2
The DC power cable used by the non-PoE model is composed of the DC power connector and
power cable, as shown in Figure 2-28.
Figure 2-29 DC power connector