Raisecom Gazelle S1020i-GL Series - 3.4 EMC Standards

Raisecom
Gazelle S1020i-GL (A) User Manual
2 Hardware structure
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
41
Figure 2-32 LC/PC fiber connector
When connecting or removing the LC/PC fiber connector, align the connector with the optical
interface, and do not rotate the fiber. Operate the fiber as below:

To connect the fiber, align the header of the fiber with the optical interface and insert the
fiber into the interface gently.

To remove the fiber, press down the spring clip, and push the fiber header inwards, and
then pull the fiber out.
Wiring
Table 2-35 lists the wiring of the fiber.
Table 2-35 Wiring of the fiber
Wiring
relationship
Local optical interface
Direction of
optical signals
Peer optical interface
Single-fiber
connection
Optical interface
<->
Optical interface
Dual-fiber
connection
Optical interface Tx
->
Optical interface Rx
Optical interface Rx
<-
Optical interface Tx