Raisecom Gazelle S1020i-GL Series - Console Cable; Figure 2-23 RJ45 Console Cable; Figure 2-24 Pins and Wiring

Raisecom
Gazelle S1020i-GL (A) User Manual
2 Hardware structure
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
33
2.7.2 Console cable
Introduction
The Console cable is used to connect the Console interface of the Gazelle S1020i-GL to the
RS-232 serial interface of the console. It transmits configuration data signals. The console
locally debugs and maintains the Gazelle S1020i-GL through the Console interface.
Connector types of the Console cable are below:

RJ45 connector: connect the Console interface on the Gazelle S1020i-GL.

DB9 female interface connector: connect the serial interface on the console.
Appearance
Figure 2-23 shows the RJ45 console cable.
Figure 2-23 RJ45 Console cable
Wiring
Figure 2-24 shows PINs and wiring of the Console cable.
Figure 2-24 PINs and wiring
Technical specifications
Table 2-26 lists technical specifications of the Console cable.