Operating Manual 1302.6163.12 - 03 4.189
R&S ESU Instrument Functions
Analyzer Mode
ACP REF
SETTINGS
The ACP REF SETTINGS softkey opens a table for selecting the transmission chan-
nel to which the adjacent-channel relative power values should be referenced.
The softkey is available only for multi carrier ACP measurements.
Remote command: SENS:POW:ACH:REF:TXCH:MAN 1
SENS:POW:ACH:REF:TXCH:AUTO MIN
TX CHANNEL 1 - 12 Selection of one of the channels.
MIN POWER TX
CHANNEL
The transmission channel with the lowest power is used as
a reference channel.
MAX POWER TX
CHANNEL
The transmission channel with the highest power is used as
a reference channel.
LOWEST & HIGHEST
CHANNEL
The outer left hand transmission channel is the reference
channel for the lower adjacent channels, the outer right
hand transmission channel that for the upper adjacent chan-
nels.
ACP REFERENCE CHANNEL
TX CHANNEL 1
TX CHANNEL 2
TX CHANNEL 3
TX CHANNEL 4
TX CHANNEL 5
TX CHANNEL 6
TX CHANNEL 7
TX CHANNEL 8
TX CHANNEL 9
TX CHANNEL 10
TX CHANNEL 11
TX CHANNEL 12
MIN POWER TX CHANNEL
MAX POWER TX CHANNEL
LOWEST & HIGHEST CHANNEL
To Next Page
Loading...
