R&S ESU Series - Instrument Setup and Interface Configuration - SETUP Key

R&S ESU Instrument Functions
Basic Settings
4.260 Operating Manual 1302.6163.12 - 03
SATURATION The SATURATION softkey activates the entry of the color saturation for the selected
element.
The range of inputs is from 0 to 100%.
Remote command: DISP:CMAP3:HSL <hue>,<sat>,<lum>
PREDEFINED
COLORS
The PREDEFINED COLORS softkey activates a table, with which the predefined
colors for the display screen elements can be selected.
Remote command: DISP:CMAP1 to 26:PDEF <color>
4.9.3 Instrument Setup and Interface Configuration – SETUP Key
The SETUP key opens the menu for configuration of the R&S ESU:
SETUP
COLOR
YELLOW
BLACK
BLUE
BROWN
GREEN
CYAN
RED
MAGENTA
WHITE
GRAY
LIGHT GRAY
LIGHT BLUE
LIGHT GREEN
LIGHT CYAN
LIGHT RED
LIGHT MAGENTA
REFERENCE FREQUENCY REFERENCE INTERNAL /
EXTERNAL
REFERENCE EXT (INT)
REFERENCE FREQUENCY
REF BW (NORM WIDE)
LISN ESH2-Z5 / ESH3-Z5 /
ENV 4200 / ENV 216 / OFF
PHASE N / PHASE L1 /
PHASE L2 / PHASE L3
150 KHZ HIGHPASS
PE GROUNDED /
PE FLOATING
PREAMP PREAMP ON/OFF
LN PREAMP ON OFF*
PRESELECT ON/OFF
TRANSDUCER
! TRANSDUCER FACTOR
TRANSDUCER SET