R&S ESU Series - 9 Status:questionable:lmargin<1|2> Register

R&S ESU Remote Control – Basics
Status Reporting System
5.28 Operating Manual 1302.6163.12 - 03
5.7.3.9 STATus:QUEStionable:LMARgin<1|2> Register
This register comprises information about the observance of limit margins in the cor-
responding measurement window (LMARgin1 corresponds to Screen A, LMARgin2
corresponds to Screen B). It can be queried with commands STATus:QUEStion-
able:LMARgin<1|2>:CONDition? and "STATus:QUEStionable:LMAR-
gin<1|2>[:EVENt]?.
Bit
No.
Meaning
0 LMARgin 1 FAIL
This bit is set if limit margin 1 is violated.
1 LMARgin 2 FAIL
This bit is set if limit margin 2 is violated.
2 LMARgin 3 FAIL
This bit is set if limit margin 3 is violated.
3 LMARgin 4 FAIL
This bit is set if limit margin 4 is violated.
4 LMARgin 5 FAIL
This bit is set if limit margin 5 is violated.
5 LMARgin 6 FAIL
This bit is set if limit margin 1 is violated.
6 LMARgin 7 FAIL
This bit is set if limit margin 7 is violated.
7 LMARgin 8 FAIL
This bit is set if limit margin 8 is violated.
8 to
14
not used
15 This bit is always 0.