R&S ESU Series - Change of Settings Via Markers - MKR-> Key

R&S ESU Instrument Functions
Analyzer Mode
4.162 Operating Manual 1302.6163.12 - 03
4.8.12 Change of Settings via Markers – MKR-> Key
The MKR-> menu offers functions through which instrument parameters can be
changed with the aid of the currently active marker. The functions can be used on
markers and delta markers.
On opening the menu, the entry for the last active marker is activated; if no marker
was enabled, MARKER 1 is activated and a peak search is performed.
MKR->
SELECT
MARKER
The SELECT MARKER softkey activates the numerical selection of the marker in
the data entry field. Delta marker 1 is selected by input of ' 0 '.
Remote command: CALC:MARK1 ON
CALC:MARK1:X <value>
CALC:MARK1:Y?
PEAK
The PEAK softkey sets the active marker/delta marker to the peak of the trace. If no
marker is active when MKR-> menu is called, MARKER 1 is automatically switched
on and the peak search is performed.
Remote command: CALC:MARK:MAX
CALC:DELT:MAX
SELECT MARKER
PEAK
CENTER = MKR FREQ
REF LEVEL = MKR LVL
NEXT PEAK
NEXT PEAK RIGHT
NEXT PEAK LEFT
SEARCH LIMITS
! LEFT LIMIT /
RIGHT LIMIT
THRESHOLD
SEARCH LIMIT OFF
MKR->TRACE
Side menu
MKR->CF STEPSIZE
MIN
NEXT MIN
NEXT MIN RIGHT
NEXT MIN LEFT
EXCLUDE LO
PEAK EXCURSION
2. side menu
AUTO MAX PEAK
AUTO MIN PEAK