R&S ESU Series - 1 Selection of Limit Lines

Operating Manual 1302.6163.12 - 03 4.241
R&S ESU Instrument Functions
Basic Settings
• In addition, commentary can be written for each limit line, e.g. a description of the
application.
Display lines are exclusively used to optically mark relevant frequencies or points in
time (span = 0) as well as constant level values. It is not possible to check automati-
cally whether the marked level values have been underranged or exceeded.
4.9.1.1 Selection of Limit Lines
LINES
The LINES key opens the menu for fixing the limit lines and the display lines.
SELECT LIMIT LINE
EDIT LIMIT LINE /
NEW LIMIT LINE
!
NAME
VALUES
INSERT VALUE
DELETE VALUE
SHIFT X LIMIT LINE
SHIFT Y LIMIT LINE
SAVE LIMIT LINE
COPY LIMIT LINE
DELETE LIMIT LINE
X OFFSET
Y OFFSET
DISPLAY LINES
! DISPLAY LINE 1 /
DISPLAY LINE 2
FREQUENCY LINE 1/
FREQUENCY LINE 2
TIME LINE 1 /
TIME LINE 2