R&S ESU Instrument Functions
Basic Settings
4.310 Operating Manual 1302.6163.12 - 03
COLORS
The COLORS softkey gives access to the submenu where the colors for the printout
can be selected (see section “Selecting Printer Colors” on page 4.310).
Remote command: --
COMMENT
The COMMENT softkey opens an entry field in which a comment of two lines (60
characters per line) can be entered for screen A or B.
If the user enters more than 60 characters, the excess characters appear on the
second line on the print-out. At any point, a manual line-feed can be forced by enter-
ing the @ character.
The comment is printed below the diagram area. The comment text appears on the
hardcopy, but not on the display screen.
If a comment should not be printed, it must be cleared.
If the instrument is reset by a click on the PRESET key, all entered comments are
cleared.
After clicking the COMMENT softkey, the auxiliary line editor can be reached with
the Ud key. Pressing the rotary knob or the ENTER key inserts the selected charac-
ters in the text line.
After editing is completed, return to the text line with the Uu key and confirm the
comment text with ENTER.
If the entered comment should be aborted, quit the auxiliary line editor with ESC.
A detailed description of the auxiliary line editor can be found in the Quick Start
Guide, chapter 4, “Basic Operation”.
Remote command: HCOP:ITEM:WIND2:TEXT 'Comment'
INSTALL
PRINTER
A certain number of printer drivers is already installed on the R&S ESU.
The INSTALL PRINTER softkey opens the Printers and Faxes dialog where more
printer drivers can be installed.
For details refer to the Quick Start Guide, appendix A.
Remote command: --
4.9.5.1 Selecting Printer Colors
COLORS
The COMMENT softkey opens the auxiliary line editor where the desired letters
can be entered in the text field by means of rotary knob and cursor keys.
Only after the auxiliary line editor has been closed with ESC can the softkeys and
hardkeys be operated again.
COLOR ON/OFF
SCREEN COLORS
To Next Page
Loading...
