Operating Manual 1302.6163.12 - 03 4.207
R&S ESU Instrument Functions
Analyzer Mode
GATE RANGES The GATED RANGES softkey opens a table to configure up to 3 gate ranges for
each trace.
Remote command: SWE:EGAT:TRACE<1..3>:COMM
SWE:EGAT:TRACE<1..3>:STAT<1..3> ON
SWE:EGAT:TRACE<1..3>:STAR<1..3> <value>
SWE:EGAT:TRACE<1..3>:STOP<1..3> <value>
SWE:EGAT:TRACE<1..3>:PER <value>
Comment Comment string
Period Period of the signal to be measured
Range x Start Begin of time period to be taken into account
Range x Stop End of time period to be taken into account
Use Range YES / NO: Allows to temporarily disable a range
The timing values have full numerical resolution and are only rounded for display.
To Next Page
Loading...
