R&S ESU Instrument Functions
Basic Settings
4.308 Operating Manual 1302.6163.12 - 03
Pressing one of the softkeys PRINT SCREEN, PRINT TRACE or PRINT TABLE in
the HCOPY menu initiates the print job. The printer parameters defined in the
DEVICE SETTINGS menu are used for setting up the printer configuration. All of the
display items to be printed are written to the printer buffer. Since the printer runs in
the background, the instrument may be operated immediately after pressing the
PRINT softkey.
With PRINT SCREEN selected, all the diagrams with traces and status displays are
printed as they occur on the screen. Softkeys, open tables and data entry fields are
not printed.
The PRINT TRACE function allows individual traces to be printed. With PRINT
TABLE, tables can be printed.
The DEVICE 1 / 2 softkeys are used for selecting and configuring the output inter-
face. For detailed information refer to “DEVICE 1 / 2” on page 4.309.
If the Print to File option in the Hardcopy Setup dialog box is selected, the printout is
directed to a file. Upon pressing one of the PRINT... softkeys, the file name to which
the output data is to be written is requested. An entry field is then opened for enter-
ing the file name. For detailed information refer to section “DEVICE SETUP” on
page 4.309.
The COLORS submenu allows switch over between black-and-white and color print-
outs (default), provided that the printer connected can produce color printouts. In
addition, the colors are set in this submenu. For detailed information refer to section
“Selecting Printer Colors” on page 4.310.
DELETE TEMPLATE
SAVE TEMPLATE
EDIT HEADER
NEW
APPEND
PRINT
PREVIEW
Side menu
INSTALL PRINTER
• SCREEN Output in screen colors.
• OPTIMIZED (default) Instead of light colors, dark colors are used for
traces and markers: trace 1 blue, trace 1 black,
trace 3 green, markers turquoise.
• USER DEFINED This option enables the user to change the colors
at will. It provides the same setting functions as
the DISPLAY – CONFIG DISPLAY – NEXT menu.
•With SCREEN and OPTIMIZED selected, the background will always be white
and the grid black. With USER DEFINED, these colors can be selected, too.
• Upon activation of the submenu, the color display is switched over to the
selected printout colors. When the menu is quit, the original color setting is
restored.
To Next Page
Loading...
