R&S ESU Instrument Functions
Basic Settings
4.312 Operating Manual 1302.6163.12 - 03
SELECT
OBJECT
The SELECT OBJECT softkey allows picture elements to be selected to change
their color setting. After selection, the PREDEFINED COLORS, BRIGHTNESS,
TINT and SATURATION softkeys enable the user to change the colors or bright-
ness, the hue and the color saturation of the element selected.
Remote command: --
BRIGHTNESS The BRIGHTNESS softkey serves for determining the brightness of the graphic ele-
ment selected.
A value between 0 and 100% can be entered.
Remote command: HCOP:CMAP5:HSL <hue>,<sat>,<lum>
TINT The TINT softkey serves for determining the hue of the element selected. The per-
centage entered refers to a continuous color spectrum from red (0%) to blue
(100%).
Remote command: HCOP:CMAP5:HSL <hue>,<sat>,<lum>
SATURATION The SATURATION softkey serves for determining the saturation of the element
selected.
A value between 0 and 100% can be entered.
Remote command: HCOP:CMAP5:HSL <hue>,<sat>,<lum>
Background
Grid
Function field + status field + data entry text
Function field LED on
Function field LED warn
Enhancement label text
Status field background
Trace 1
Trace 3
Marker
Lines
Measurement status + limit check pass
Limit check fail
Table + softkey text
Table + softkey background
Table selected field text
Table selected field background
Table + data entry field opaq titlebar
Data entry field opaq text
Data entry field opaq background
3D shade bright part
3D shade dark part
Softkey state on
Softkey state data entry
Logo
SELECT D ISPLAY OBJECT
Trace 2
To Next Page
Loading...
