R&S ESU Remote Control – Description of Commands
CALCulate Subsystem
6.88 Operating Manual 1302.6163.12 - 03
CALCulate<1|2>:MATH:MODE LINear | LOGarithmic | POWer
This command selects linear or logarithmic (= video) calculation of the mathematical functions related
to the traces. The calculation of the average is one of the affected functions. The setting is valid for all
measurement windows, i.e. the numeric suffix <1|2> of CALCulate is irrelevant.
Example: "CALC:MATH:MODE LIN"
'Switches on the linear calculation.
Characteristics: *RST value: LOG
SCPI: device-specific
Mode: A-T
To Next Page
Loading...
