R&S ESU Series - Page 529

R&S ESU Remote Control – Description of Commands
CALCulate Subsystem
6.90 Operating Manual 1302.6163.12 - 03
CALCulate<1|2>:PEAKsearch|PSEarch:MARGin MINimum .. MAXimum
This command defines the margin for the peak search.
The numeric suffix in CALCULATE<1|2> is not significant.
Example: "CALC:PEAK:MARG 5 dB"
Characteristics: *RST value: 6 dB
SCPI: device-specific
Mode: A, R
CALCulate<1|2>:PEAKsearch|PSEarch:SUBRanges 1 to 500
This command defines the number of subranges for the peak search.
The numeric suffix in CALCULATE<1|2> is not significant.
Example: "CALC:PEAK:SUBR 10"
Characteristics: *RST value: 25
SCPI: device-specific
Mode: A, R
CALCulate<1|2>:PEAKsearch|PSEarch:METHod SUBRange | PEAK
This command defines the method that is used to determine the level maxima of a scan.
The numeric suffix in CALCULATE<1|2> is not significant.
Example: "CALC:PEAK:METH SUBR"
Characteristics: *RST value: PEAK
SCPI: device-specific
Mode: R