R&S ESU Series - Page 547

R&S ESU Remote Control – Description of Commands
DISPlay Subsystem
6.108 Operating Manual 1302.6163.12 - 03
DISPlay[:WINDow<1|2>]:TEXT[:DATA] <string>
This command defines a comment (max. 20 characters) which can be displayed on the screen in the
selected measurement window.
Example: "DISP:WIND2:TEXT 'Noise Measurement'"
'Defines the title for screen B
Characteristics: *RST value: "" (empty)
SCPI: conform
Mode: R, A
DISPlay[:WINDow<1|2>]:TEXT:STATe ON | OFF
This command switches on or off the display of the comment (screen title) in the selected
measurement window.
Example: "DISP:TEXT:STAT ON"
'Switches on the title of screen B.
Characteristics: *RST value: OFF
SCPI: conform
Mode: R, A
DISPlay[:WINDow<1|2>]:TIME ON | OFF
This command switches on or off the screen display of date and time. The numeric suffix in
WINDow<1| 2> is irrelevant.
Example: "DISP:TIME ON"
Characteristics: *RST value: OFF
SCPI: device-specific
Mode: R, A
DISPlay[:WINDow<1|2>]:TRACe<1...3>:X:SPACing LINear | LOGarithmic
This command toggles between linear and logarithmic display.
Example: "DISP:TRAC:X:SPAC LIN"
Characteristics: *RST value: LOGarithmic
SCPI: conform
Mode: R, A
The numeric suffix in TRACe<1...3> is irrelevant.
DISPlay[:WINDow<1|2>]:TRACe<1...3>:X[:SCALe]:ZOOM ON | OFF
This command switches the zoom on or off.
Example: "DISP:TRAC:X:ZOOM ON"
Characteristics: *RST value: OFF
SCPI: conform
Mode: R, A
The numeric suffix in TRACe<1...3> is irrelevant.