R&S ESU Series - Page 631

R&S ESU Remote Control – Description of Commands
SENSe Subsystem
6.192 Operating Manual 1302.6163.12 - 03
[SENSe<1|2>:]LIST:RANGe<1…20>:SWEep:TIME:AUTO ON | OFF
This command controls the automatic coupling of the sweep duration on the frequency span and the
bandwidth settings in a spurious measurement range.
Example: "LIST:RANG2:SWE:TIME:AUTO ON"
'Activates the coupling of frequency range and bandwidths in range 2
Characteristics: *RST value: ON
SCPI: device-specific
Mode: A
[SENSe<1|2>:]LIST:RANGe<1…20>:TRANsducer <string>
This command sets the transducer factor for a range in the spurious measurement.
Example: "LIST:RANG2:TRAN 'fac_1'"
'Sets the transducer factor fac_1 in range 2
Characteristics: *RST value: --
SCPI: device-specific
Mode: A