Operating Manual 1302.6163.12 - 03 6.305
R&S ESU Remote Control – Description of Commands
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
FSE CONFigure[:BTS]:CHANnel:SLOT 0 to 7 not available for
R&S ESU and FSET
FSE CONFigure[:BTS]:CHANnel:SLOT:AUTO ONCE not available for
R&S ESU and FSET
FSE CONFigure[:BTS]:CHANnel:TSC 0 to 7 not available for
R&S ESU and FSET
FSE CONFigure[:BTS]:CHANnel:TSC:AUTO ON | OFF not available for
R&S ESU and FSET
FSE CONFigure[:BTS]:COSiting ON | OFF not available for
R&S ESU and FSET
FSE CONFigure[:BTS]:LIMIt:FREQency <numeric_value> not available for
R&S ESU and FSET
FSE CONFigure[:BTS]:LIMIt:PPEak <numeric_value> not available for
R&S ESU and FSET
FSE CONFigure[:BTS]:LIMIt:PRMS <numeric_value> not available for
R&S ESU and FSET
FSE CONFigure[:BTS]:LIMit:STANdard ON | OFF not available for
R&S ESU and FSET
FSE CONFigure[:BTS]:NETWork:PHASe 1|2[,PLUS] not available for
R&S ESU and FSET
FSE CONFigure[:BTS]:NETWork[:TYPE] PGSM |PGSM900 |
EGSM |EGSM900 | DCS
|GSM1800 | PCS |
GSM1900 | RGSM |
RGSM900
not available for
R&S ESU and FSET
FSE CONFigure[:BTS]:POWer:CLASs 1 to 8 | 1 to 4 | M1 | M2 |
M3
not available for
R&S ESU and FSET
FSE CONFigure[:BTS]:POWer:COUPled ON | OFF not available for
R&S ESU and FSET
FSE CONFigure[:BTS]:POWer:DYNamic 0 to 15 not available for
R&S ESU and FSET
FSE CONFigure[:BTS]:POWer:EXPected <numeric_value> not available for
R&S ESU and FSET
FSE CONFigure[:BTS]:POWer:LIMit <numeric_value> not available for
R&S ESU and FSET
FSE CONFigure[:BTS]:POWer:SINGle:CLEar not available for
R&S ESU and FSET
FSE CONFigure[:BTS]:POWer:SINGle[:STATe] ON | OFF not available for
R&S ESU and FSET
FSE CONFigure[:BTS]:POWer:STATic 0 to 6 not available for
R&S ESU and FSET
FSE CONFigure[:BTS]:PRESet not available for
R&S ESU and FSET
FSE CONFigure[:BTS]:SWEeptime STANdard | AUTO not available for
R&S ESU and FSET
FSE CONFigure[:BTS]:TXSupp ON | OFF not available for
R&S ESU and FSET
Devices Command (Sheet 17 of 47) Parameter Notes