R&S OSP User Manual

R&S OSP Remote Command Reference
Operating Manual 1505.3896.12 - 14 154
'<instr_address>'
Address of an R&S OSP instrument, built up from the instrument
type ID and the serial number of the instrument.
Instrument type ID:
2: R&S OSP120
3: R&S OSP130
5: R&S OSP150
Serial number: for example 100001
Example - Set
ROUT:MOD:DEF F01,3100001
Assigns the R&S OSP130 instrument with serial number 100001
to the instrument name F01.
Example - Query
ROUT:MOD:DEF? F01
Response: 3100001
Characteristics
Firmware version V1.0
SCPI-confirmed
ROUTe:MODule:DELete <instr_name>
The previously defined <instr_name> will be deleted from the instrument’s internal
memory and from the compact flash. Afterwards the relays and I/O channels of this
instrument cannot be controlled any longer.
'<instr_name>'
Represents the name of an R&S OSP instrument, which
previously was assigned to the instrument.
Format: F01, F02, .. up to F09
Example - Set
ROUT:MOD:DEL F03
All relay and I/O channel modules of the R&S OSP instrument
assigned to the name ’F03’ are not longer available.
Characteristics
Firmware version V1.0
SCPI-confirmed. No query.
ROUTe:MODule:DELete:ALL
All previously defined <module_names> will be deleted from the instrument’s internal
memory and from the compact flash. Afterwards the relays and I/O channels of all
instruments that built up a system cannot be controlled any longer.
Example - Set
ROUT:MOD:DEL:ALL
All relay and I/O channel modules of all R&S OSP instruments
cannot be controlled any longer.
Characteristics
Firmware version V1.0
SCPI-confirmed. No query.

R&S OSP Specifications

General

Brand	R&S
Model	OSP
Category	Control Unit
Language	English