R&S OSP User Manual

R&S OSP Getting Started
Operating Manual 1505.3896.12 - 14 72
3.7.1 Configuring the GUI Info Line
Start the OSP Panel application and connect the R&S OSP120 or R&S OSP130 to your
PC. Now select --> , as in the example below:
The GUI Info Line menu allows to select the following modes:

Info Line Mode
R&S OSP130 display
OFF
No info line is shown
Customer Text
You can define any text to be shown
Actual Path
Shows the name of the currently switched path
To enter a text line with a maximum of 49 characters, select the Info Line Mode
“Customer Text”. After pressing the button, you are prompted to press the
“STATUS” key on R&S OSP130 front panel for activating the OSP GUI Info line (see
screenshot below).

R&S OSP Specifications

General

Brand	R&S
Model	OSP
Category	Control Unit
Language	English