Rane Performer - Page 35

35
Name Description Control Beats Parameter Depth
10 Echo Out
This creates
an echo tail
of the
original
signal at the
specified
beat size
while muting
the original
signal.
Turn Depth
to the max
position to
hold the
echo tail
infinitely.
Paddle Beats:
1/8, 1/4, 1/3,
1/2, 3/4, 1,
3/2, 2, 3
Default: 1/2
HPF Cut Off:
40 Hz,
80 Hz,
140 Hz, 244
Hz, 427 Hz,
748 Hz, 1308
Hz,
2287 Hz,
4000 Hz
Default:
140 Hz
<50% - The
effect is mixed
with the
program audio
from the
assigned deck.
When Depth
knob is turned
to the left of
the center, the
effect wet mix
is reduced.
50% - The
effect is 100%
wet and no
program audio
from the deck
is heard while
the effect is
engaged.
>50% - The
effect is 100%
wet and no
program audio
from the deck
is heard while
the effect is
engaged.
When Depth
knob is turned
to the right of
the center, the
tail length
(feedback) is
increased.
11 Fader Filter
This effect
allows you to
use the
channel faders
apply filter
sweeps.
Channel
Fader
N/A
Type: Band
Pass, High
Pass, Low
Pass
Default: High
Pass
0-100%
The effect wet
mix is applied
on a linear
scale.
12 Fader Pitch
This effect
allows you to
repitch the
program audio
of the
respective
channel using
the channel
fader.
Channel
Fader
Direction:
UP, UPW
(wide), DN,
DNW, CT,
CTW
Default: Up
Scale: Major,
Minor, Off
Default: Off
0-100%
The effect wet
mix is applied
on a linear
scale.