Rane Performer - Page 36

36
Name Description Control Beats Parameter Depth
13 Fader Ring
This effect
allows you to
add ring
modulation to
the program
audio of the
respective
channel using
the channel
fader.
Channel
Fader
Frequency:
800 Hz, 1
kHz, 1.5 kHz,
2 kHz, 4 kHz,
8 kHz
Default: 2
kHz
Mode:
Increase,
Decrease
Default:
Decrease
0-100%
The effect wet
mix is applied
on a linear scale.
14 Fader Roll
This effect
allows you to
use the
channel faders
to apply filter
sweeps.
Channel
Fader
N/A HPF: On, Off
Default: Off
0-100%
The effect wet
mix is applied
on a linear scale.
15 Fader Tone
This effect
allows you to
use the
channel faders
to control
various tone
generators.
Channel
Fader
Key: C, D, E,
F, G, A, B
Default: C
Tone Type:
Sine,
Sawtooth,
Square,
Triangle
Default: Sine
Octave: 0-8
Default: 6
Scale: Major,
Minor, Off
Default: Off
0-100%
The output level
of the tone
generator.
16 Flanger
Adds a
slightly
delayed
copy of the
original
signal to
create a
comb-filter
effect.
Turn FX
Depth to
adjust the
balance of
the original
and effected
signal in the
mix.
Paddle Beats:
1/16, 1/8,
1/4, 1/2, 1, 2,
4, 8, 16, 32,
64
Default: 16
Feedback:
0-100%
Default:
34%
Polarity:
Positive
(POS),
Negative
(NEG)
Default:
POS
0-100%
The effect wet
mix is applied
on a linear
scale.