4 | How to work with the unit
14 / 60 Original operating instructions
4. Close the cooking cabinet door. Make sure that the cooking cabinet door is fully closed and the cooking
cabinet door handle is in the vertical position.
Rack level over 1.60 m
If your unit has been installed so that the top rack is 1.60 m above the floor, you must apply the warning symbol
supplied at that position.
4.7 Inserting core temperature probe
The following sections describe how to work both with the core probe and with the externally attachable core
probe.
CAUTION
Hot core probe
There is a risk of burns if you touch the hot core probe without protective gloves.
1. Always wear protective gloves when working with the hot core probe.
2. If necessary, cool down the core probe using the hand shower.
CAUTION
Sharp core probe
You could injure yourself with the tip of the core probe if you do not work carefully with it.
1. Always wear protective gloves when working with the hot core probe.
2. After use, insert the core probe into the holder provided.
NOTICE
The core probe is hanging out the cooking cabinet
If you do not insert the core probe into the holder provided after use, the core probe may be damaged.
1. After use, insert the core probe into the holder provided.
To Next Page
Loading...
