10 | iProductionManager
Operating instructions 61 / 112
n
It is not possible to save tickets that have already been processed as planning.
n
The additional inject steam function is not available when planning.
10.7.1 Create planning
1. Press the button in the menu bar:
2. Press the button
3. Press the button +New planning
> The positioning aid slides on the left edge of the display. The scaling of the time axis changes from the current
time in the description to minutes. You can now place tickets, regardless of the time.
4. Position the desired tickets. You can place up to 30 tickets.
The following functions are available for planning optimisation:
n
Close planning gaps [}57]
n
Time optimisation [}58]
n
Energy optimisation [}59]
1. To start planning without saving, press the button:
2. To save the planning, press the button:
To Next Page
Loading...
