13 | Settings
Operating instructions 75 / 112
13.6.3 À la carte plate weight
Before you start the finishing, set how heavy an empty plate is. With the help of this information, your iCombi
Prowill adjust the cooking steps, so that you achieve an ideal finishing result and no moisture condenses on the
plates. Click here for more information: Adjust plate weight à la carte [}51]
13.6.4 Banquet plate weight
Before you start the finishing, set how heavy an empty plate is. With the help of this information, your iCombi
Prowill adjust the cooking steps, so that you achieve an ideal finishing result and no moisture condenses on the
plates. Click here for more information: Adjust banquet plate weight [}51]
13.6.5 Number of racks
Here you can set how many racks you want to use in the iProductionManager.
1. Press the button Number of racks
2. Select the desired value from 0-10 on the scale.
>> The setting is immediately adopted.
13.6.6 Order of racks
Here you can set if the order of racks in the iProductionManager should be displayed in ascending or descending
order.
1. To display the racks in ascending order, press the button: 123
2. To display the racks in descending order, press the button: 321
>> The setting is immediately adopted.
13.6.7 Climate retention time
Here you can set how long the climate in the cooking space should be maintained, if you do not prepare dishes
with the iProductionManager.
1. Press the button Climate retention time
2. Select the desired value on the scale.
>> The retention time is immediately adjusted.
13.6.8 iProductionManager 3D
Here you can set that you want to load onto the racks with two metal sheets in the iProductionManager. Each
metal sheet is monitored separately. Please note that no more than 12 racks can be displayed.
To Next Page
Loading...
