13 | Settings
72 / 112 Operating instructions
2. Press the button Light
13.3.1 Display brightness
Here you can adjust the display brightness on a scale from 0 - 100%.
1. Press the button Display brightness
2. Select the desired value on the scale.
>> The display brightness is immediately adopted.
13.4 Sound
1. Press the button
2. Press the button Sound
You can adjust the following settings:
n
Master volume [}72]
n
Loading/calls for action [}72]
n
Programme step end [}72]
n
End of cooking time [}73]
n
Process interruption/error found [}73]
13.4.1 Master volume
Here you can set the master volume of the unit on a scale of 0 - 100%.
1. Press the button Master volume
2. Select the desired value on the scale.
>> The master volume is immediately adjusted.
13.4.2 Loading/calls for action
Here you can set which sound or melody you would like to sound when you want to either load the unit or ask it
to perform an action. You can choose from 37 options.
1. Press the button
2. Press on the desired sound.
> The sound will play.
3. If you want to switch off the sound, press the button:OUT
4. To apply the setting, press the following button on the icon bar:
>> You will return to the overview. Your setting will be displayed.
13.4.3 Program step end
Here you can set which sound or melody you would like to sound when a programme step is completed. You can
choose from 37 options.
1. Press the button
2. Press on the desired sound.
> The sound will play.
3. If you want to switch off the sound, press the button:OUT
4. To apply the setting, press the following button on the icon bar:
>> You will return to the overview. Your setting will be displayed.
To Next Page
Loading...
