13 | Settings
Operating instructions 77 / 112
1. Press the button Copy HACCP log to a USB stick
>> The HACCP data is saved on the USB stick.
13.8.2 Export and import programmes
Here you can export and import all the programs you have created.
Export programs
a You have created programs in the programming mode.
a You have connected a USB flash drive to the unit.
1. Press the button Export programs
>> The saved programs are saved on the USB flash drive.
Import programs
1. Connect a USB flash drive containing the exported programs to the unit.
2. Press the button Import programs
>> The saved programs are imported and displayed in programming mode.
13.8.3 Delete all programs
Here you can delete all programs you have created.
1. Press the buttonDelete all programs
> You will be asked if you really want to delete the programs.
2. To confirm the action, press the button:
>> A message will confirm that all programs have been deleted.
13.8.4 Export and import profiles
Export profiles
a You have created a profiles.
a You have connected a USB flash drive to the unit.
1. Press the button Export profiles
>> The saved programs are saved on the USB flash drive.
Import profiles
1. Connect a USB flash drive containing the exported programs to the unit.
2. Press the button Import profiles
>> The saved profiles are imported and are displayed in the user management area.
13.8.5 Delete all own profiles
Here you can delete all profiles you have created. The preset profiles will not be deleted.
1. Press the buttonDelete all own profiles
> You will be asked if you really want to delete the profiles.
2. To confirm the action, press the button:
>> A message will confirm that all own profiles have been deleted.
13.8.6 Export and import images
Here you can import and export all images you have created.
To Next Page
Loading...
