11 | Programming mode
Original user’s manual 49 / 84
After making your selection, any matching intelligent cooking paths will be
shown on the display.
1. Select an intelligent cooking path.
> The individual cooking steps will be displayed. Now you are ready to adjust
the cooking parameters to fit your needs. The first cooking step will be
highlighted in red.
2. Press this button:
> Any editable cooking parameters and additional functions for that cooking
path will be displayed. Standard settings for the cooking path are marked
with this symbol:
3. Adjust the cooking parameters as desired.
4.
To save your changes, press
> The individual cooking steps will be displayed again.
5.
To give the cooking path a name, press
6. Enter a name.
7.
To save the cooking path, press
>> The cooking path will be saved and added to the list of available cooking
paths. The newly programmed cooking path will be shown in the list.
To Next Page
Loading...
