11 | Programming mode
48 / 84 Original user’s manual
1. Adjust the cooking step as desired.
2. To save your changes, press
3. Drag-and-drop additional cooking steps into the bottom section.
4. To give the cooking path a name, press
5. Enter a name.
6. To save the cooking path, press
>> The system will check the program. If all cooking parameters are fully defined
and logically organized, the program will be saved and added to the list of
available programs.
>> If the program contains an error, that section of the program will be marked.
Fix the error before saving the program again.
11.2 Programming intelligent cooking paths
On intelligent cooking paths, you can only adjust the cooking parameters - it is
not possible to re-sequence the individual cooking steps.
1. In the menu bar, press
2. Press this button: + New element
3. Press this button:
> The system will ask you what you would like to program.
4. Select one of the following options:
n
Operating mode
n
Operating mode and cooking method
n
Cooking method
To Next Page
Loading...
