Machine settings 8
66
Example of field spreading during late fertilising:
Figure 8.5: Field spreading during late fertilising
During field spreading in late fertilisation mode, a symmetrical spreading pattern
is produced. If the spreader is correctly set (see information in the fertiliser chart),
the fertiliser is evenly spread over the field.
The following settings are to be applied to the machine according to the fertiliser
chart:
Specified parameters:
Type of fertiliser: ENTEC 26 COMPO BASF
Working width: 12 m
Spreading disc type: M1
Forward speed: 10 km/h
Application rate: 300 kg/ha
Mounting height: 0/6 (A = 0 cm, B = 6 cm)
Metering slide adjustment: 160
PTO speed: 540 rpm
Spreading vane adjustment: C3-B2
To Next Page
Loading...
