Machine settings 8
70
Functional principle:
The spreading vanes of the spreading disc can be adjusted for various fertilising
types, working widths and kinds of fertiliser.
Normal fertilisation
Full border spreading during normal fertilising (optional right or left)
Late fertilising
Full border spreading during late fertilising (optional right or left)
Spreading vane angle adjustment:
Adjusting in the direction of smaller numbers: The spreading vane is pushed
backwards on the angle.
Adjusting in the direction of larger numbers: The spreading vane is pushed
forwards on the angle.
Spreading vane length adjustment:
Shortening the spreading vane: The moveable extension vane is pushed to-
wards the centre of the spreading disc and then clicked into place.
Extending the spreading vane: The moveable extension vane is pulled out-
wards then clicked into place.
Spreading vane adjustment:
Set the spreading vane to the position determined previously according to the fer-
tiliser chart.
Example: C3-B2
Figure 8.9: Spreading vane adjustment, example C3-B2
NOTICE
Adjusting the spreading vane on the right spreading disc is always the same
as adjusting the spreading vane on the left spreading disc (with the exception
of full border spreading).
To Next Page
Loading...
