RAV TD8060TWS - RAV TD8060TWSR
RAV TD8080TWS - RAV TD8080TWSR
Code M0230 - rev.1.1
(01/2014)
RAVAGLIOLI S.p.A. – 40044 Pontecchio Marconi (BO) Via I Maggio, 3
Tel. (+39) 051/ 67.81.511 – Fax (+39) 051/ 84.64.67
e-mail: rav@ravaglioli.com /http www.ravaglioli.com
7 PROGRAM CONFIGURATION
To configure the program, select key F2 on the presentation page.
A configuration menu is accessed here program characteristics can be changed according to
individual requirements.
Figure 16
Language selection: The language can be selected from among 31 available languages
Backup / Restore: So as not to risk losing the vehicle and client databank data, it is best to
create a backup copy (save). For this operation, use an USB “flash disk”.
NOTE: if the PC features a floppy disk drive, a standard 3.5" floppy-disk can also be used.
Lost or cancelled data can be retrieved using the restore procedure if a backup has been
made.
Configuration: the program displays the display page in Figure 17.
It is possible to change the system parameters, the databank profile and specify which
component parts are in the appliance and what type they are.
Date/time configuration: The system date and time can be changed so as to correctly
record the time of the performed operations.
Print personalisation: Enter the data relating to the workshop; these will be printed together
with the measurements taken.
Return to presentation page.
Move the selection up.
Move the selection down.
Confirm selection.
illustrated in the
installation and
calibration
manual
To Next Page
Loading...
Need help?
General
