Ravaglioli RAV TD8060TWS User Manual

INSTRUCTION MANUAL
RAV TD8060TWS - RAV TD8060TWSR
RAV TD8080TWS - RAV TD8080TWSR
Code M0230 - rev.1.1
(01/2014)
RAVAGLIOLI S.p.A.
RAVAGLIOLI S.p.A. – 40044 Pontecchio Marconi (BO) Via I Maggio, 3
Page 57/ 64
Tel. (+39) 051/ 67.81.511 – Fax (+39) 051/ 84.64.67
e-mail: rav@ravaglioli.com /http www.ravaglioli.com
10 PERSONALISATION OF VEHICLE DATA BANK
The vehicle data bank can be personalised and personalised vehicles can be created.
10.1 Entering a new vehicle
To create personalised vehicles and store these in the databank, first of all the page of
measurements and tolerances provided by the manufacturer of an already present vehicle
will have to be displayed (see para. 8.3 page 23).
At this point, the “Ins” key will have to be pressed on the keyboard:
The following display page will appear:
Figure 42
As will be shown in Figure 42 at the point highlighted, the make of the selected vehicle is
highlighted by a red background.
The name of the personalised vehicle make can be entered. Next, select and enter:
 Vehicle name and model

Rear track
 Start of production date

Left wheel base
 End of production date

Right wheel base
 Rim diameter

Load conditions
 Front track

Fuel tank condition
By means of the following keys, the following data can be selected:
Move selection to next figure.
Move selection to previous figure.
Once the data have been entered, the option is given to cancel them by means of the
following keys:
Cancels all selected elements
Cancels the last figure of the selected element
Once the right and left wheel bases have been entered, by going on to the next figure, the
following display page will appear relating to load conditions
Point shown

Ravaglioli RAV TD8060TWS Specifications

General

Brand	Ravaglioli
Model	RAV TD8060TWS
Category	Power Tool
Language	English