To Next Page

To Previous Page

Smartrax Loom Routing

STEPS

1) Route the Smartrax Loom from the Valve

towards the tractor cab. It should lead into the

tractor cab through a suitable entry point.

NOTE: Ensure Smartrax Loom is mounted

neatly. Secure it (where possible) to existing

points on the tractor using cable ties. Ensure it

is not routed near heated areas such as the

exhaust. Do not route it in close proximity to

moving parts.

KEY POINTS

NOTE: Ensure Smartrax Loom is securely

connected to the Valve.

Raven SmarTrax Installation Guide

Other manuals for Raven SmarTrax